AAA BLINDS ACCESSORIES
Find the shape you recognise. Explore covers, brackets and small parts for roller shades, 2-inch faux-wood blinds, vertical blinds and screens.
A fascia covers the front of the roller; a cassette forms a housing around it. For replacement parts, the profile, dimensions and mounting system all matter.
35 illustrated accessories
Roller shade accessories
Flat front cover
A straight front cover that conceals the roller and mounting hardware.
The photo compares a 4-inch cover on the left with a 3-inch cover on the right. Confirm the height, mounting profile and colour with our team.
Roller shade accessories
3¼-inch curved profile
A rounded cassette housing for a softer finish above the shade.
A cassette forms a housing around the roller. Match the full profile, dimensions and end fittings before choosing a replacement.
Roller shade accessories
3⅛-inch front face
A square-front cassette for a clean, architectural finish.
The front face measures 3⅛ inches. Confirm the overall housing dimensions, mounting system and finish before ordering.
Roller shade accessories
Square top return
A flat-front fascia with a square top return that conceals the roller hardware.
White profile shown. Fascia and cassette profiles are different; match the cross-section and bracket connection.
Roller shade accessories
Rounded front cover
A curved-front cover for the roller hardware.
White profile shown. This is a fascia cover, not a cassette housing. Match the profile and bracket connection.
Roller shade accessories
For a compatible 3-inch fascia
An adjustable mounting bracket for a compatible 3-inch fascia assembly.
Designed for a specific 1½-inch clutch connection. Match the mechanism, mounting holes and cover profile; size alone does not confirm fit.
Roller shade accessories
For a compatible 3-inch fascia
A fixed mounting bracket for a compatible 3-inch fascia assembly.
Designed for a specific 1½-inch clutch connection. Match the mounting pattern, mechanism and shade system.
Roller shade accessories
Intermediate support · 3-inch fascia
An intermediate support bracket for a compatible 3-inch fascia assembly.
This supports the fascia between mounting points. It does not replace an end mounting bracket; installation suitability must be checked.
Roller shade accessories
Curved housing · assembly view
A curved cassette shown as part of a cordless roller shade assembly.
An earlier assembly style is pictured for identification. Current construction and finish may vary; confirm the complete system with our team.
Roller shade accessories
External mounting style
An external mounting bracket for a compatible cassette housing.
An earlier bracket style is pictured for identification. Match the cassette profile, fixing points and current bracket shape.
Roller shade accessories
Paired bracket set
A paired bracket set with side adjustment for a compatible cordless cassette mechanism.
An earlier assembly style is pictured. Match both ends of the mechanism and the cassette connection before selecting replacements.
Roller shade accessories
Paired bracket set
A paired bracket set with wheel adjustment for a compatible cordless cassette mechanism.
An earlier assembly style is pictured. Match the adjustment mechanism and both mounting connections.
Roller shade accessories
Internal lift mechanism
An internal gearbox used in a compatible cordless roller shade lift system.
For part identification. Match the mechanism and housing; installation and adjustment should be checked by our team.
2-inch faux-wood blind parts
High-profile headrail · paired brackets
Box-style steel brackets that hold the ends of a compatible 2-inch blind headrail.
For a matching high-profile headrail. Confirm the headrail height, width and fixing-hole positions. White finish shown.
2-inch faux-wood blind parts
Decorative front trim clip
A clip that holds the decorative valance on a compatible 2-inch blind.
Match the valance profile, headrail height and clip attachment. The nominal blind size alone does not confirm fit.
2-inch faux-wood blind parts
Bottomrail retaining bracket
A bracket that holds a compatible blind bottomrail in position.
Check the bottomrail pin connection and installation surface before choosing a replacement.
2-inch faux-wood blind parts
2-inch blind · hex tilt shaft
An internal wand-operated mechanism that tilts the slats in a compatible low-profile blind.
Match the headrail profile, hex shaft dimensions, hook and fixing points. The 2-inch slat width alone does not confirm compatibility.
2-inch faux-wood blind parts
2-inch blind · square tilt shaft
An internal wand-operated mechanism for a compatible high-profile blind.
Match the headrail profile, square shaft dimensions, hook and fixing points. This is a different fitting from the low-profile version.
2-inch faux-wood blind parts
12-inch length · hook connection
A hollow plastic wand with a hook for adjusting the slat angle.
The reference shows the 12-inch option. Match the hook, tilt mechanism and required length.
2-inch faux-wood blind parts
Decorative trim · faux-wood blinds
Compare curved, decorative and flat-front valances alongside a slat and shaped bottomrail.
From left: curved valance, decorative valance, flat-front valance, slat and trapezoid bottomrail. Confirm the profile, dimensions and finish.
Vertical blind parts
44 × 32 mm track profile
An aluminium track section for a compatible vertical blind assembly.
Confirm the rail cross-section, carrier and drive connections. A matching outer size does not guarantee that internal parts fit.
Vertical blind parts
3½–5-inch adjustment · ceiling clip
An adjustable mounting bracket with a clip for a compatible vertical blind track.
Match the track clip and fixing arrangement. Check the required clearance, wall or ceiling surface and load before installation.
Vertical blind parts
For a compatible 89 mm / 3½-inch vane
A plastic hanger for the top of a compatible vertical blind vane.
Match the vane construction and carrier connection. The vane width alone does not confirm compatibility.
Vertical blind parts
H-hook style · 76 mm spacer family
A carrier with a clear vane stem for a compatible 76 mm spacer system.
This is a family reference image. Confirm the left or right orientation, gear and rail connection; the picture alone does not identify handedness.
Vertical blind parts
H-hook style · 79 mm spacer family
A carrier with a clear vane stem for a compatible 79 mm spacer system.
This is a family reference image. Confirm the left or right orientation, gear and rail connection. It is not automatically interchangeable with other 79 mm carriers.
Vertical blind parts
Track carriage · 79 mm spacer style
A carrier and spacer used to hang and space the vanes along a vertical blind track.
The pictured set is supplied unassembled. Match the rail section, gear connection and spacer length; different carrier systems are not interchangeable.
Vertical blind parts
4-foot length · capped end
A control wand for operating a compatible vertical blind system.
Match the connector and control mechanism, then confirm the length required for the installation.
Vertical blind parts
End cap with drive fitting
An end-cap and drive assembly for a compatible vertical blind track.
Match the track profile, drive connection and operating system. Ask our team to check the complete assembly before replacement.
Vertical blind parts
Wand-operated control assembly
A control assembly for operating a compatible vertical blind with a wand.
Match the track, carrier system and wand connection. Installation and operation should be checked as a complete system.
Screen & door accessories
Window & door screens
Mesh for window and door screens.
Confirm the material, width and weave required for your screen. Ask our team about available options.
Screen & door accessories
Small access-frame connector
A corner connector for the small access frame in a screen.
Match the wicket bar profile and connector size. This is not a universal window-screen corner.
Screen & door accessories
5/16-inch frame profile
A corner piece for a compatible 5/16-inch flat screen frame.
Match the frame cross-section, connector dimensions and colour.
Screen & door accessories
Mesh retaining strip
A foam spline that holds the mesh in the screen frame groove.
Check the spline diameter and groove profile before choosing a replacement.
Screen & door accessories
Plastic grip tab
A small tab for handling a removable window screen.
Match the tab fixing and frame type.
Screen & door accessories
Rubber edge seal
A rubber strip that closes the gap along a screen door edge.
Check the attachment profile and required strip width against the existing door.
Try a different part name or reset the filters. For an unlisted part, bring a photo and measurements to our team.
Help identifying a part ↓Images are a visual guide, not a live stock list. Similar-looking parts can fit different systems. Our team will confirm the version, compatibility and availability before an order.
A GOOD MATCH STARTS WITH A CLEAR PHOTO
Start an enquiry or visit our Richmond showroom. Tell us whether the part is for a roller shade, 2-inch faux-wood blind, vertical blind or screen.
